Mit diesem Elementtyp kann eine Waldfläche mit einer Höhe modelliert werden. Je nach Dichte des Waldes kann ein spezifischer Dämpfungskoeffizient [dB/m] eingegeben werden.
❑
Anmerkungen:
Waldflächen haben einen festen Bodentyp. Der ist immer absorbierend (Gras).
Wenn spektrale informationen einer Quelle vorhanden sind, wird die Hindernisdämpfung durch den Wald spektral berechnet.
For ISO9613-calculations, the "simple" method is based on the original ISO9613:1996 method (which is also presented as the "simplified method" in ISO9613:2024, A.2.2) . [The here implemented extension allows for the specification of the attenuation coefficient at 500Hz; a value of 0.05dB/m leads to the attenuation specified in the original method (which is intended to model a dense forest).] For spectral sources, the provided coefficient is used for 500Hz.
The "detailed" method [≥SLIP'25] is introduced in the 2nd edition of the ISO9613 standard, section A.2.3 [ISO9613:2024]. It uses forestal parameters (stem diameter, basal area, standing stock, horizontal structuring and low-height foliage) to estimate a spectral attenuation coefficient. For nonspectral sources, the attenuation for 500Hz is used.
The ISO9613-standard provides typical parameter values for light, normal and dense forests; these are displayed in the following table.